How To Ideas

How to Enable and Disable Power Reserve on Apple Watch

0

00_lead_image_low_power_watch_on_electricity_background

The battery in the Apple Watch lasts approximately 18 hours, depending on use. If your battery gets too low, you can put the watch into Power Reserve mode so you can see the time for up to 72 hours.

All Apple Watch functionality shuts down except the ability to keep and display the time, which can only be displayed by pressing the side button on the watch. The time displays for six seconds. All apps, glances, and other general watch functionality are not available in Power Reserve mode and your Apple Watch and iPhone won’t communicate.

The result of putting your watch in Power Reserve mode is a sharp decrease in power usage. You’ll have basic watch functionality for a longer period of time until you have a chance to recharge your watch battery.

We’ll show you how to enable Power Reserve mode and how to get your watch back to normal mode. There are few ways you can enable Power Reserve mode.

If you’ve run down the battery on your watch to 10 percent, the “Low Power” screen displays, as shown in the image at the beginning of this article. Tap the “Power Reserve” button. The following confirmation screen displays. Tap “Proceed” to put the watch in “Power Reserve” mode.

01_tapping_proceed_after_low_power_message

You can also put the watch in “Power Reserve” mode using Glances. Swipe up on the main watch face and swipe right or left until you find the Battery glance. Tap the “Power Reserve” button.

02_tapping_power_reserve_on_glance

The same confirmation message displays as seen from the “Low Power” screen, but in green instead of red. Tap “Proceed” to put the watch into “Power Reserve” mode.

03_tapping_proceed_from_glance

Finally, you can turn on “Power Reserve” mode by pressing and holding the side button until you see the following screen.

NOTE: If you’ve applied a Passcode to your watch, the “Lock Device” button would also be available on this screen.

Drag the “Power Reserve” slider button to the right to turn on the “Power Reserve” mode. When turning on “Power Reserve” mode using this method, there is no confirmation screen.

04_sliding_power_reserve_from_side_button

Now the only functionality is keeping and viewing the time, which displays in green when you press the side button.

05_time_in_power_reserve_mode

To disable “Power Reserve” mode and return your Apple Watch to normal mode, you need to reboot the watch. Press and hold the side button until you see the Apple logo. The watch will boot into normal mode. Note that this only works if you have enough battery life to boot the watch. You can attach the charger to the watch while it’s booting if you don’t have enough battery power.

“Power Reserve” mode makes your smartwatch into a very dumb watch. While your Apple Watch is in “Power Reserve” mode, there are things that “normal” watches (non-smart watches) can do that the Apple Watch can’t do. But, if you need to make your battery last longer, “Power Reserve” mode is helpful.

Lori Kaufman is a freelance technical writer who likes to write geeky how-to articles to help make people’s lives easier through the use of technology. She loves watching and reading mysteries and is an avid Doctor Who fan.

Related Posts Plugin for WordPress, Blogger...
Nagaraju Tadakaluri
Nagaraju Tadakaluri is a Professional Web Designer, Freelance Writer, Search Engine Optimizer (SEO), Online Marketer, Multi Level Marketer (MLM) and Business Promoter. Have developed Latest Updates in hopes to educate, inform and inspire.

How to Find Out Which Build and Version of Windows 10 You Have

Previous article

Former Bank of England Director Joins Blockchain Startup Setl

Next article

You may also like

Comments

Comments are closed.

More in How To Ideas